The TVS1400 Single-Plate Large Format Vertical Gel Electrophoresis Unit The Scie-Plas single-plate large format vertical gel electrophoresis unit is ideal for high-resolution techniques, such as DNA sequencing, DNase and RNase footprinting, and heteroduplex and oligonucleotide analysis, which require longer separation distances. Optional FHS-KIT- Comprises a fan operated by a heat sensor temperature control unit
- Gel temperature is set by manual adjustment of the dial on the front panel of the control unit
- Fan is screwed onto the lid of the TVS1400 in place of the ventilation grille
- Fan is activated within 4°C of the preset temperature
- Separations performed in less than 2 hours at 55°C at 75W constant power

Nine different program settings | each with 9 different parameters - allow more complex, multi-step techniques to be programmed and stored, while voltage ramping, automatic crossover and recovery after power failure are included as standard | Safety lid | although light weight and easily detachable, the lid cannot be removed during electrophoresis without breaking the electrical circuit | High voltage 3kV output | allows desired Volt-hours to be attained faster at maximum voltage during IEF resulting in shorter overall run time | Ventilation grille | aids heat dispersal during electrophoresis and can be replaced by the optional thermostatic fan kit (see FHS-KIT) | 4/2MMA adaptors | compatible with the 2mm recessed outputs of the 8 - adapt the 4mm shrouded power connectors of the TV100YK and TV400YK units for lower voltage 2nd dimension SDS-PAGE | High voltage power cables | oriented asymmetrically for correct polar orientation - with 2mm shrouded output connectors that are universally compatible with modern high voltage power supplies | Safety handles | complimented by a new streamlined and light weight design - allow easy transportation around the lab | Spring-loaded plate clamps | act in conjunction with counterbalanced silicone gaskets to maintain uniform gel thickness and even distribution of pressure across the 4mm thick float glass plates | Aluminium back plate | serves as a heat sink to prevent sample distortion and 'smiling | Lower buffer chamber | clips directly onto the anode and can also be used to drain buffer from the upper chamber | Optional FHS-KIT | an adjustable, thermostatically controlled fan kit powered independently to maintain gel temperature | Melinex combs and spacers | 0.25 and 0.35mm thick - precision machined for maximum loading accuracy and optimum band resolution |

Complete SystemSingle-plate vertical gel electrophoresis unit with integral GRM and aluminium back plate; upper and lower buffer chambers;
lid, 2 x (33 x 41cm; W x H) plain glass plates, 2 x (33 x 41cm) notched glass plates, 2 x 0.35mm melinex spacers and 1 x 0.35mm thick 48-sample shark's tooth melinex comb | TVS1400 | please contact us |  |
Replacement Parts & Accessories2 x (33 x 41cm) plain glass plates for TVS1400 | TVS1400-PG | 110,00 € |  |
2 x (33 x 41cm) notched glass plates for TVS1400 | TVS1400-NG | 105,00 € |  |
2 x 0.35mm thick spacers for TVS1400 | TVS1400-S0.35 | 40,00 € |  |
Fan sensor kit including heat sensor temperature control unit, fan and mains power lead for TVS1400 (220-240Va.c.) | FHS-KIT | please contact us |  |
2 x 0.2mm thick, platinum electrode wire for TVS1400 | PT-0.2 | 128,00 € |  |
2 x 1 metre power leads with shrouded 2mm power output connectors TVS1400 | CABLE-2 | 85,00 € |  |

| TVS1400 | see ordering details | Unit Dimensions (WxDxH) | 63x21.5x50cm | Plate Dimensions (WxHxT) | 33x41x0.4cm | Standard Spacer Dimensions (WxHxT) | 10x410x0.35mm | Active Gel Dimensions (WxH) | 29x38.5cm | Maximum Sample Capacity | 1 x 96 | Recommended Buffer Volume | Upper Buffer Chamber | 1200ml | Lower Buffer Chamber | 1200ml | Recommended Running Conditions for 6% Denaturing PAGE Gel Using Passive Ventilation at 20°C Ambient Temperature | Power | 45 - 55W | Gel Temperature | 50 - 60°C | Time | 2.5 - 3h | Recommended Running Conditions for 6% Denaturing PAGE Gel Using FHS-KIT at 20°C Ambient Temperature | Power | 75W | Gel Temperature | 55°C | Time | 1.75h | Power Output Connectors (diameter) | Shrouded, 2mm | Recommended Power Supplies | Consort EV232 & EV233 |
| | FHS-KIT | see ordering details | Unit Dimensions (WxDxH) | 9.6x14x8cm | Temperature Control Range | 0 - 100&de;C | Temperature Control Accuracy | +/-2% | Fan Dimensions (WxDxH) | 12x12x3.8cm | Fan Operating Speed | 2700rpm | Flow Rate | >84CFM | Noise Rating | 36 dBA |
|

Order-Nr | Thickness(mm) | Sample Throughput | Tooth Widt (mm) | Tooth Height (mm) | Max. Spacing (mm) | Sample Volume in a 5mm Deep Weel (µl) | Price | Add | TVS1400-C0.35-40 | 0.35 | 40 | 4 | 5 | 3 | 7 | please contact us |  | TVS1400-C0.35-60MC | 0.35 | 60 | 2 | 5 | 2.5 | 3.5 | please contact us |  | Shark's Tooth Combs | TVS1400-SC-M0.35-48 | 0.35 | 24 | 3 | 10 | 2.8 | 5 | please contact us |  | TVS1400-SC-M0.35-60MC | 0.35 | 60 | 2.5 | 10 | 5.6 | 4 | please contact us |  | TVS1400-SC-M0.35-96 | 0.35 | 96 | 2.5 | 9 | 4.5 | 3.5 | please contact us |  | ORDERNR-MC = Multichannel pipette compatible |
 |
|